Dichtol Capillary Sealer
for thermal spray coatings

Dichtol reliably seals cracks and the finest pores. This series of high-performing polymers penetrate deeply into the coating and prevent corrosion of the metal surface. Dichtol products allow quick, thorough, on-the-spot repair for a broad range of coatings.

Properties

  • Transparent and invisible when cured
  • High solids content: up to 40%
  • Resists mechanical, thermal and chemical attacks: pressure resistant to 8700 psi, heat resistant to 932°F
  • Vibration dampening
  • Significantly increases the machinability of the coating
  • Application by dip, brush or spray
  • Shelf Life is 6 months in closed containers
  • Approved for applications involving food and drinking water

 

 

 
 Dichtol WFT
 FL    Spray
#1532   #2087
Dichtol WFT Makro
FL #1532  Spray #2088
Dichtol HTR
FL #0977
Dichtol Hydro
FL #1524
Dictol WF49
FL #1849
ApplicationdippingX             -X             -XXX
brushingX             -X             -XXX
injectingX             -X             -XXX
spray can-             X-             XX-X
pump sprayer - spray chamberX             --             --X 
Dipping time /
Penetration time
     
up to 5 mm wall thickness46101010
5 - 10 mm810151515
10 - 15 mm1315202020
> 15 mm3040404040
Surface Drying (minutes)35-60 
Surface layer thickness (µm)38420 
Cure at +20°C (hours) capacitylight
(completely)
light
(completely)
Has to be
tempered
1 hour after
the application
at 250° C
for 3 hours
light
(completely)
 
bis 5 mm wall thickness6 (24)8 (24)8 (24) 
5 - 10 mm10 (24)12 (24)14 (24) 
10 - 15 mm17 (48)19 (48)20 ()48 
> 15 mm24 (48)28 (48)28 (48) 
Technical data     
Pore size (mm)0 - 0.10.1 - 0.50 - 0.10 - 0.50 - 0.5
Permanent temp. resistance (°C)-40 / +300-40 / +300-40 / +500-40 / +200-40 / +120
Temporary temp. resistance (°C)-40 / +450-40 / +450-40 / +550-40 +300-40 / +200
Compression strength (bar)bis 350bis 300bis 350bis 150 
Viscosity (DIN 4 cup, +23°C)
DIN 53211 (4 mm nozzle) (sec)
13171210